Valve Rebuilds > Construction Equipment (16 entries)

Valves we have rebuilt off other construction equipment

Search valves that we have recently rebuilt:

  • Michigan L270 Loader - Husco Valve
    4 spool husco valve. Found blown o-rings and 2 spools that needed reworked. Seal area around poppet needed re-ground.
  • Bobcat Cessna 39055 Valve
    Cessna 1 spool valve off a Bobcat. Replaced all springs and seals in valve. Spool was rechromed and polished to OEM tolerances.
  • Hydreco 9250352 3 Spool Valve
    We rebuilt this valve for a customer who resells them. Nice paint!
  • Swivel off Gradall G3WD Excavator
    We repaired the hydraulic swivel off of a Gradall G3WD excavtor. Swivel repair is similar to control valve repair.
  • Link-Belt LS3400C Excavator Oilic Swivel
    We rebuilt the Oilic swivel (YV-7055C) off of a Link-Belt LS3400C.
  • Terex Backhoe - Husco Valve
    We repaired a 7 spool Husco valve off a Terex Backhoe TX760. Husco Valve SN: E02E930 6106964 M95. E02E930 6106964M95 6610G3K. Valve Before Disassembley
  • Vickers Control Valve, 2 Sections
    This valve was sent to us, but we aren't sure what equipment it came off of. Valve was manufactured by Vickers (CM3N01R25TTDL30). This is a sectional valve with fairly a ...
  • Case W20 Wheel Loader
    3 spool Parker valve.
  • Kobelco Excavator Control Valve
    We repaired a 2 spool valve off a Kobelco Excavator (K903C).
  • Hydreco Valve Off Scraper
    We rebuilt this 2 spool valve manufactured by Hydreco (Model 58SX4000). Not sure what make of machine but it was off a scraper. These are BEFORE pictures:
  • Alis Chambers Scrapper
    TRW, Code: 2083AA, V0201J, T1494, 4Spool Control Valve. This was a challenge as all of the bores had different ID/lengths and blind holes. This made for individual set-ups for each bore ...
  • International Harvester TD15C Dozer
    3 Spool control valve off of a 1972 TD15C International Harvester Dozer. This control valve is no longer made and our customer could not find a used one. The spools were ...
  • New Holland - Skid Steer
    Husco CNH87583290 control valve. This came in with a bent spool! This spool is very thin on the OD which will require extra time but it is worth it for a ...
  • Col-Mar Material Handler
    This valve has seven spools and is manufactured by Rexroth for Col-Mar. We contaced Col-Mar and we were told we could not get seals and would have to buy a new ...
  • Bobcat T200 Valve
    T200 Compact Track Loader. In additon to repairing sever scores in the spools we also replaced all of the seals and the detent Spring and Ball.
  • Koehring D81E527
    This valve was a huge challenge but we were able to find obsolete parts so the owner could get his machine up and running. This machine had a Husco main control ...