We rebuilt this valve as a rush job for a manufacturer. The customer could not find a replacement and production was stalled. We rebuilt quickly and got the customer ...

The Nishina Kogyo is an oil control valve that we repaired for an industrial customer.

We rebuilt the 2 spool Honeywell V5035A 10171 valve.

2 Spool valve. This valve came in with deep scores that went all the way thru the complete bore. After body was 100% cleaned up we brought the chrome up to ...

2 Spool Valve: This valve had severe scoring in the aluminum housing due to a spring that broke internally. We were able to hone the bore, chrome to size and manufacture ...

Large single spool valve - badly worn, making the spool very loose to the bore. Clearance came in at .003"/.004". We will bring clearance back to .0002"/.0003".

This valve was manufactured in the 1940's so it had seen it's share of hard times. The spools were worn and allowing internal bypass. We were able to bring valve back ...

Industrial valves are no problem. This valve came in with sever scoring and normal wear. This was a singe spool valve so turn around was 2 weeks. We were able to ...

This is a 3 spool valve off of a Pacific Press Brake. Upon disassemble we found that the bores were deeply scratched and worn to .018". We are able to hone ...

New block and replaced all seals.

Valve operates a cylinder under a cross slide in or out direction. Valve had scoring on the lands. The scores were allowing bypass. We honed the bore and rechromed spools back ...